cram3:e:e11295
Numbering within Subseries
MARC-Bib: 490v (Volume number/sequential designation)
- Check the 'Source' instruction to be sure that you are looking at the correct source(s) of information on the resource
- If data on the resource and data as the element in the record are:
- PoR/PaE–check the Data Entry instructions:
- data for this element must be Transcribed, but 1.7 and 1.8: make sure the data matches word-for-word and letter-for-letter (except exceptions)
- PoR/AaE–check the Core instructions:
- data for this element is Core:
- if the data has been given as a wrong element, move it to the correct element
- if the data is completely missing, add the data for this element
- AoR/PaE–check the Source instructions again:
- since the Source for this element is or includes 'Any', accept the data, but only if it seems applicable
- AoR/AaE–go to the next element:
- but be sure to check the resource carefully, if the data for the element is Core, or if the data is important for differentiating the resource from a similar resource
- Check below, for any useful Notes
MARC:
- check the correct ISBD separating punctuation for Numbering Within Subseries:
- 490–preceding $v ( ; )
cram3/e/e11295.txt · Last modified: by 127.0.0.1
